How to test if rock is safe for the tank????

The forum for the very best information on loaches of all types. Come learn from our membership's vast experience!

Moderator: LoachForumModerators

Post Reply
User avatar
Dave_2133
Posts: 157
Joined: Thu Jun 08, 2006 9:56 am
Location: Staffordshire, England

How to test if rock is safe for the tank????

Post by Dave_2133 » Thu Mar 29, 2007 2:45 pm

I've had some rock from my local fishing lakes i just wanted to know the safest way to test if is ok to put in my tank.

I've heard that you can put vinigar on it and if it bubbles then its not safe, but dont know how true this is :?
Top
User avatar
palaeodave
Posts: 1370
Joined: Mon Jul 24, 2006 5:25 am
Location: London/York

Post by palaeodave » Thu Mar 29, 2007 5:18 pm

If it effervesces with acid (bubbles with vinegar) then it is made of calcium carbonate and so will slowly dissolve in your tank water both increasing the pH and hardness. Probably not what you want. Vinegar is pretty weak acetic acid, so you might want to watch carefully. Make sure you rinse it off thoroughly if you're going to then put it in your tank.
Top
User avatar
sophie
Posts: 1883
Joined: Sat Dec 31, 2005 10:15 am
Location: birmingham. definitely not Alabama!
Contact:
Contact sophie

Post by sophie » Thu Mar 29, 2007 7:28 pm

but if you're in staffs and you share the brimingham water supply (do you?) then adding a buffer wouldn't hurt. upping the hardness and keeping the pH stable isn't a bad thing at all round here!

if you're worried about bugs you could either stick it in a bucket of milton overnight then rinse, rinse, rinse and dechlorinate or try a low oven for a few hours; but depending on the rock that could (fairly slim possibility) result in it going BANG...
sophie.
there is no them
there is only us

http://www.duckduckgoosestuff.co.uk
Top
User avatar
tglassburner
Posts: 261
Joined: Mon Nov 27, 2006 9:07 am
Location: Windsor, Ohio 44099
Contact:
Contact tglassburner

Post by tglassburner » Thu Mar 29, 2007 7:52 pm

I boiled all the rock for my rivertank
Hi, my name is Tom, and I'm a loachaholic.

Image
Top
User avatar
chefkeith
Posts: 2646
Joined: Tue Jan 03, 2006 9:37 pm
Location: Detroit

Post by chefkeith » Thu Mar 29, 2007 8:33 pm

I used a TDS meter to test most of my rocks. I put each type of rock in a seperate container and filled each one RO water. Then I'd test the water with the TDS meter after about 1 week. I learned that all of the rocks I had tested were leaching something into water.
Top
Killfrenzy
Posts: 7
Joined: Sat Mar 31, 2007 1:23 am

Post by Killfrenzy » Sat Mar 31, 2007 2:20 pm

Say, there wouldn't happen to be any slag in the rocks you tested? Smelting byproduct, somewhat glassy/obsidian look, dark blue/green color (around here, anyways). It seems inert, but I don't exactly have a TDS meter on hand...
:shobon:
Top
User avatar
Dave_2133
Posts: 157
Joined: Thu Jun 08, 2006 9:56 am
Location: Staffordshire, England

Post by Dave_2133 » Mon Apr 02, 2007 12:38 pm

I went to redesign my tank today with the new rocks i got, but sadly when i was cleaning them and doing the vinegar test all of them bubbled like crazy :cry: so it looks like i'll have to go the DIY/Gardens centres to buy some now. But some of them only bubbled slightly and i had to use a magnifing(sorry bad spelling) glass to see it, so would these b ok to use???
Top
Post Reply

Return to “Loach Forum”

Who is online

Users browsing this forum: No registered users and 123 guests