At the moment I have an external filter that is very effective when running but the problem occurs when I have to clean it. Due to the way it is set up (at least I think this is the reason) I have to prime it manually as in removing the inlet tube and siphoning the water and then putting it back in the tank, I can't just use the priming button as I can't get enough force to pump the water through. This way it can take a lot of time, effort and mess to clean the filter. So I was wondering for the mechanical filtration could I put a sponge filter in the tank and remove the foam pad from the external filter and just use the external filter for biological filtration. Would this work?
Thanks for any advise and I hope that someone understands what I'm trying to say : )
Unfortunately the way the tank is set up I'm not sure I have space for another external filter (which sits next to the tank) and there's not much room behind the tank, we had trouble fitting the new filter so that the pipes didn't come above the hood.
I don't think the blue sponge is why I can't prime it but I wondered if I could remove it and just use the external as mechanical filtration so that I can reduce the amount times I have to clean the filter. I think it has quick disconnects if thats where you slide the lever and remove the tubes from the main body. I tried not filling it with water after cleaning as in the manual it says it should be free of water however it didn't work so filled it up to the top and pushed the primer button as fast as I could but it wouldn't force the water so I had to siphon it, I think by doing the same as you (get confused which is the intake and outlet). But we shouldn't have to do that surely? Also by having it so full it overflowed a bit after I got it working again and being next to electrical stuff wasn't great. I'm just dreading each time I have to clean it so wondered if it were a viable option to just use a sponge filter instead of the blue sponge in the external.
I think the whole problem is that the filter is next to the tank and the pipes are at a funny angle as usually you would have the filter underneath the tank with the tubes going straight down which isn't option for us with the tank set up.
Ill changed poly filter weekly just like Ady, ive found pond supplies do just the same job all you need is some scissors.
XRumer 12.0.16 + SocPlugin: the BEST program for Facebook / VK / Forums / Blogs promotion!
Who is online
Users browsing this forum: No registered users and 2 guests