Preparing PVC pipes for loaches

The forum for the very best information on loaches of all types. Come learn from our membership's vast experience!

Moderator: LoachForumModerators

Post Reply
User avatar
raecarrow
Posts: 525
Joined: Thu Oct 16, 2008 1:45 pm
Location: Gaithersburg, Maryland

Preparing PVC pipes for loaches

Post by raecarrow » Sat Jun 20, 2009 9:10 pm

Hello everyone,

I recently bought some short lengths of 2 in diameter PVC piping to make my own loach motel and 2 in diameter corner bends to place around the tank.

The question I have, is there any preparatory work that needs to be done to the piping before putting it in the tank? I have been hesitant to just drop the pieces into the tank for fear of injuring my little buddies by polluting the water or anything I have yet to think of. Any advice would be greatly appreciated.

Thanks!
Rae
Rae

User avatar
mistergreen
Posts: 1640
Joined: Sat Dec 02, 2006 12:41 pm
Location: Round at the ends and Hi in the middle

Post by mistergreen » Sat Jun 20, 2009 9:36 pm

Just a wash under running water will work.

Now for the other side of things, PVCs do release a small amount of the chemicals called dioxin which is cancerous. In the news lately, you've heard of companies getting rid of baby bottles made of pvcs.

I personally don't think it's that much of a deal in an aquarium.

Diana
Posts: 4675
Joined: Wed Jan 04, 2006 1:35 am
Location: Near San Franciso

Post by Diana » Sat Jun 20, 2009 11:35 pm

Use some sand paper on the edges to be sure they are smooth.
38 tanks, 2 ponds over 4000 liters of water to keep clean and fresh.

Happy fish keeping!

User avatar
raecarrow
Posts: 525
Joined: Thu Oct 16, 2008 1:45 pm
Location: Gaithersburg, Maryland

Post by raecarrow » Sun Jun 21, 2009 12:01 am

Thanks!
Rae

PASoracco
Posts: 129
Joined: Sun Nov 16, 2008 12:49 am
Location: Bay Area, CA
Contact:

Post by PASoracco » Tue Jun 23, 2009 6:02 am

if you are cutting it or sanding the edges i would recommend rinsing it, then soak it in some tank water for a day or two, changing the water once or twice. if anything is going to leach, it will get out here.
Just call me Pierce :)
"Act Well Your Part - There All the Honor Lies"

bigpow
Posts: 106
Joined: Wed Mar 04, 2009 10:50 am

will it float?

Post by bigpow » Thu Jul 02, 2009 2:46 am

I have a 2" and 1" pipes in my tank.
My biggest gripe with them is that they FLOAT like MAD.
I had to tie a huge (1/2 human head) rock to make them hold their ground.

I've been thinking about casting them into a bucket filled with concrete (concrete like in pool, should be safe for fish tank, no?)
or
drilling/screwing them into a flat rock (super hard to drill a rock)

How do you plan to install your PVC pipe?

User avatar
raecarrow
Posts: 525
Joined: Thu Oct 16, 2008 1:45 pm
Location: Gaithersburg, Maryland

Post by raecarrow » Thu Jul 02, 2009 8:12 am

I put 2" pipe corners in there and they don't float at all. I just partically burried them in the sand.
Rae

User avatar
LoachOrgy
Posts: 1235
Joined: Thu Jan 18, 2007 1:09 pm
Location: Florida, USA

Post by LoachOrgy » Mon Jul 13, 2009 11:31 pm

you can also boil it in a pot prior to placing it in the tank. bring the water to a boil. place them in once you get a rolling boil. leave it in for a minute. then take out and let cool.
All your loaches are belong to me!

bigpow
Posts: 106
Joined: Wed Mar 04, 2009 10:50 am

this i have to try

Post by bigpow » Tue Jul 14, 2009 2:54 am

1st time i heard the boil pvc trick
-will try this week-end

i thought they float like mad because i got the wrong type (black/irrigation), but let me try boiling them

User avatar
Keith Wolcott
Posts: 720
Joined: Sun Mar 04, 2007 1:49 pm
Location: Charleston, Illinois USA

Post by Keith Wolcott » Tue Jul 14, 2009 10:17 am

bigpow- I think that you have the wrong type. Regular PVC pipe will not float.

bigpow
Posts: 106
Joined: Wed Mar 04, 2009 10:50 am

ah...

Post by bigpow » Tue Jul 14, 2009 11:10 am

Keith, thanks for letting me know before I make my PVC soup.
By regular, you mean the standard white PVC (schedule 40/80)?



Dave Letterman should add these PVC pipes into his "Will it float?" feature

Clowntje
Posts: 95
Joined: Thu Apr 17, 2008 6:53 am
Location: The Netherlands

Post by Clowntje » Tue Jul 14, 2009 11:23 am

Could it be difrent types of PVC pipes?

I have PVC pipes too in difrent sizes and both my pipes drift if i dont burry them or put rocks on it.

Not that my Clowns bother they deliberate move the smaller piece and then lay back in it while it takes turns floating. :lol:

Mmm gonna check it this weekend we have 2 types one for indoor use and one for outdoor use. The indoor ones float.
Still pending between NL and DE and rebuilding our new home.

BotiaMaximus
Posts: 536
Joined: Sat Apr 11, 2009 9:54 pm
Location: St. Pete, Florida

Post by BotiaMaximus » Tue Jul 14, 2009 12:53 pm

I would be cautious about boiling PVC. PVC is not made for hot water. They make special CPVC to use for hot water installations and is yellowish in color. I don't know what the effect is, but it is possible that boiling it might actually cause it to release chemicals that would otherwise be inert at normal temperatures.
"Long May You Loach"

User avatar
Keith Wolcott
Posts: 720
Joined: Sun Mar 04, 2007 1:49 pm
Location: Charleston, Illinois USA

Post by Keith Wolcott » Tue Jul 14, 2009 6:27 pm

I have used white PVC schedule 40.

User avatar
DainBramage1991
Posts: 274
Joined: Sun Feb 19, 2012 8:56 pm
Location: Northern New England

Re: Preparing PVC pipes for loaches

Post by DainBramage1991 » Sat Mar 24, 2012 6:26 pm

I know I'm a day late and a dollar short on this, but the reason why some PVC pipe floats and most doesn't is that some DWV rated schedule 40 pipe has foam embedded in the pipe wall. This is low pressure drainage pipe, the cheap kind. Regular, pressure rated schedule 40 PVC is solid-wall construction and will sink in an aquarium.

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 127 guests